Satin Chrome
(click to view larger)
|
| Plug & Wastes |
| SPECIFICATION: |
| Item: |
Dimensions: |
Finishes: |
| - |
|
-80mm (H) x 50mm (W)
-50mm (H) x 50mm (W)
-50mm (H) x 40mm (W)
|
|
-Chrome
-Brass
-Brass Ultraplate
|
|
| |
|
| DESCRIPTION: |
|
Antique Baths require a 50mm waste. (New baths require 40mm wastes). It is important to install a good quality plug n waste as it sets off the bath and must tolerate a lot of use. We recommend Brodware wastes as they are solid brass including the plug which also has a protective rubber seal around the plug, to protect your bath. |
|
| |
|
| |
Satin Chrome
For a modern or contemporary feel, this is a stunning finish. To compliment this, the bath feet may also be electroplated in Satin Chrome. |
| |
|
Polished Chrome
(click to view larger) |
Polished Chrome
Our most popular finish, complimenting other fittings and fixtures within the bathroom. Bath feet may be electroplated in Polished Chrome or Pewter to match this colour bath waste. |
| |
|
Brass Ultraplate
(click to view larger) |
Brass Ultraplate
This is very easy to clean and is 3 times more wear resistant than an untreated plated surface. Bath feet may be electroplated in Polished Brass or Antique Brass to compliment this colour bath waste. |
| |
|
Brass
(click to view larger) |
Brass
Standard Brass wastes are available if you are after a traditional, antique look for your bath. These come with a black rubber plug. Check with our staff for standard Bath and Chrome wastes as we carry limited stocks. |
| |
|
Chrome 40MM
(click to view larger) |
Basin Wastes
Brass & Chrome plug n wastes are also available. We stock 40mm and 50mm wastes for old fashion & new sinks. Standard and pop-up styles are available. |
| |
|
Plugs
(click to view larger) |
Plugs
A selection of 50mm, 40mm, 32 mm plugs in brass or rubber are available. |
| |
|
(click to view larger)
(click to view larger)
|
|
| SPECIFICATION: |
| Item: |
Dimensions: |
Finishes: |
| - |
-50mm - 40mm |
Polished Chrome & Brass |
|
| |
|
| DESCRIPTION: |
If there is a 40mm waste pipe coming up from the floor and your
trying to install an antique bath with a 50mm waste, you will
need a waste converter. These are screwed onto the bottom of the
waste and attach directly to the 40mm waste outlet. As a standard
order, they are available in solid brass; however they can be electroplated Chrome if required. |
|
About Us
